4.5 (192) · € 14.99 · En Stock
A large stepper motor, this NEMA 23 is strong enough to move large loads that undergo a lot of variation. This stepper can be used with all SlushEngine models. It provides 1.3 N.m of torque and can travel up to 400 rpm. The stepper travel 1.8 degrees per step. With 128 division micro stepping it can produce an accuracy
Nema 23 Stepper Motor - 2.5 A, 1.3 N.m, 184 oz.in - 1, 3, or 5
This is our largest Nema 17 Motor. With a stack length of 60mm this will give you the most torque available in a Nema 17 package. If you need the CAD
Stepper Motor Nema 17: 0.6(N.m) Length 60
Nema 23 Stepper Motor - High Torque - 1.8degree/step, 345oz-in
Buy 23HS30-3004S Nema 23 Stepper Motor Bipolar 1.8 Deg 1.9Nm
all – Roboteurs
1.9Nm(269oz.in) holding torque Single Shaft 6.35mm diameter NEMA 23 bipolar 2.24x2.24x3.0 4-wire 1.8 deg. step angle(200 steps/rev) Rated current
STEPPERONLINE Nema 23 Stepper Motor 3.0A 269oz.in/1.9Nm 76mm Length Step Motor for CNC Mill Lathe Router
NEMA 23 motor
NEMA 23 Stepper Motor - OpenBuilds Part Store
Buy Nema 23 Closed Loop Stepper Motor 23HS45-4204D-E1000 1.8 Deg
Pololu - Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×56mm