4.5 (724) · € 6.00 · En Stock
PerformanceAnalysis Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.Special processing technology and post-treatment make the nozzle without burr at the edge of
PerformanceAnalysis
Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole.Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion.Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.High quality imported die steel material ensures the stability of performance.
ApplicableFilament
Wear-resistance, High temperature performance, suitable for 3D printing composites with abrasive additives such as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment as well as conventional materials.
ProductFeatures
φ0.1
Min. Orifice Diameter
±0.01mm
Tolerance
≤Ra0.4μm
Inner Hole Roughness
≤0.02mm
Concentricity
Phaetus XG Hardened Steel Nozzles - 3DJake International
Phaetus PMK8 Hardened Steel MK8 Nozzle - 3DEA
Phaetus Voron Dragon Hotend HF (high flow)
V6 nozzles are designed for use with the E3D V6 heater block. Modify your HotEnd to print with small nozzle orifices to achieve fine details or larger
V6 Nozzles
V6 Nozzle Hardened Steel Top Quality Compatible with E3d V6 Nozzle For 1.75mm 0.4/0.6/0.8MM Carbon Fiber PEI PEEK Phaetus Drago
Phaetus Dragonfly Hotend BMS - 3DJake International
HARDENED STEEL NOZZLE – Phaetus Store
Ultimate 3D Printer Nozzle Comparison
1Piece Hardened Steel Nozzle M6 Nozzle 0.4mm for V6 Hotend Prusa MK3S Anycubic Mega S/X/Zero 2.0 Printing Pei Peek or Carbon Fiber Filament Use (1x